Lowering kit UrS4/V8 and HP2 brakes

[quattrostyle]

I'm looking for a subtle lowering kit with springs and shocks to lower my Audi V8 (40mm), I'm led to believe UrS4/S stuff fits aswell. And I want to convert my V8 to HP2 brakes, so I'm looking for a complete kit.

Thanks

[Jonas_R]

A friend of mine has a complete refurbished HP2 caliber set with disc. Send me a PM and I will give you his email.

[blo ndie]

Hi i am the friend :-)

and the set i have is as Jonas says a complete refurbished HP2 caliber not with disc but brand new pads

[quattrostyle]

how much are you looking for, would you happen to have spare struts aswell?

[spont]

have a word with spink he maybe able to help you out

[rs200]

I think that you need this..?





this is from my 200 20v .. everithing is same on V8..

[UrS4boy]

UrS4/S6 Front suspension and Front brake info

I'm looking for a subtle lowering kit with springs and shocks to lower my Audi V8 (40mm), I'm led to believe UrS4/S stuff fits aswell. And I want to convert my V8 to HP2 brakes, so I'm looking for a complete kit. Thanks

I think you will need UrS4/S6 front struts that came with the HP2 calipers to make the complete conversion. There is a lot of strut and brake info in these posts:

Hub carrier/strut info:
General:

http://forums.quattroworld.com/s4s6/msgs/24392.phtml

and more to the point:

http://forums.quattroworld.com/s4s6/msgs/33797.phtml

Brakes:
General:

http://forums.quattroworld.com/s4s6/msgs/25095.phtml

and more to the point:

http://forums.quattroworld.com/s4s6/msgs/25331.phtml

[Nace20]

you can buy springs for ordinary 100 c4, i have then on my v8 from 100 2.3 avant fwd

[quattrostyle]

I think that you need this..?
this is from my 200 20v .. everithing is same on V8..

not especially a coilover kit, but it sure looks nice. A straight forward 40mm. drop would work for me. Had a look at your thread to convert the Ufo legs to accept the HP2 brakes. Looks like the way to go

If that's all done it's time to get the fat fives from an A6 4.2 under the car, should look just fine

[Masterblaster]

Hi,

i have ufo struts converted to fit HP2 or bigger brakes...

[Colesy]

I have a pair of HP2 struts with calipers, springs and shockers, I can get some pictures up if needed. Open to offers.

[UrS4boy]

.... Had a look at your thread to convert the Ufo legs to accept the HP2 brakes. Looks like the way to go

Can you post a link to that conversion? I wasn't aware that such a conversion was available and thought switching to UrS4/S6 HP2 struts and hub carriers was the way to go.
(Thanks in advance)

[Masterblaster]

Hi,

this might help...

http://www.motorgeek.com/viewtopic.php?t=29978&start=0

[UrS4boy]

Hi, this might help...
http://www.motorgeek.com/viewtopic.php?t=29978&start=0

Thanks. Are there any non-machining alternative/conversions that use the UFO strut and bearing carrier?

[quattrostyle]

there is only a little bit of machining involved