S2 3b crankcase breather ribber

[s28quattro]

Hi people

I am looking the rubber connector for the crankcase breather on a 3b S2 , audi inform me it is a discontinued part :-( mine is perished and blown out can anyone help or is there a modification?
Oh nearly forgot need the n/s gearbox mounting bracket also mine is cracked
Thanks

[UrS4boy]

Is what you are looking for in this diagram:

[s28quattro]

Hi
It's the rubber that unit goes in to that joins it to the engine block , I have the audi parts diagram somewhere

Thanks

[AndyP]

Roose Motorsport make a kit

http://roosemotorsport.co.uk/index.php?main_page=product_info&cPath=1_59_84&products_id=181

[s28quattro]

Thanks Andy P bit pricy for me but at least it's an option

[djh]

I should have the gearbox bracket

[newsh]

The 3B PCV system doesn't look like that diagram. The pipe you're talking about, the one that always rots out, is a kind of T piece with a long 8mm leg which goes round to the back of the head and the top of the T is stubby and has one side at 30mm to the block and the other side 20mm to the "Pressure Regulating Valve".
A few years back I made a bunch of alloy Ts which would allow the use of short bits of staight 20 and 30mm hose and a bit of 8mm about 50cm long to replace the £90 part. Since some of the people I made these for are now running catch tanks its possible there is one of these around if you ask I will have a look in the garage but I think I donated mine to a 3B a couple of years back. I no longer have a supply of the material to make them.

[newsh]

Here ya go

http://www.s2forum.com/forum/showpost.php?p=190490&postcount=88

[s28quattro]

What's running a catch tank incorporate ...

[s28quattro]

Hi DJH how much for the bracket ?

[dirtybarry]

I have the full breather kit available from my 3b with alloy t piece that newish mentioned. can post some pic's later. Let me know if you want it!

[s28quattro]

Yes dirtybarry I am interested , how much?

[dirtybarry]

Are these the hoses your after, sorry about the poor quality pic.