Climatronic head unit wanted

[niall4313]

Looking for a climatronic control/display unit if anyone has one, tried ebay but as usual they just sent me some piece of **** that doesnt work

[A80Avant]

I have one, bought from ebay myself a little while back but have tested it works.
I payed 150euros for it. I'm happy to get that back. Its in Greece at the moment but I will be back there in 2 weeks and coming back on the beginning of november.

If you are interested let me know

sent with WSGS3

[A80Avant]

We are talking about the lhd one, right? Not the old one

sent with WSGS3

[niall4313]

Its just the control unit/ display I need the piece in the dash with the buttons on it.

[goodazz]

Its just the control unit/ display I need the piece in the dash with the buttons on it.

what audi do you have?
or maybe you know the part number of CU/Dispaly?

[A80Avant]

Do you have a photo of it?

Is it this one?



sent with WSGS3

[Jonas_R]

I have the old one for 3b you can have it for 100 euro + shipping?

[niall4313]

Part number is 5HB 006 500-3 from a 1994 c4. Think I have one sorted now at any rate

[gabrielm]

hi all

I have a problem with the buttons of my climatronic.



you need a lot of strength to function. we must stress enough the button to turn the function it

--
the strange thing is that sometimes it works normal just touch lightly already triggers the function.

what it takes to make the buttons work correctly? what i need to do?

thanks for your time.

[A80Avant]

If you take the unit out, remove the faceplate you can possibly open it and clean around the areas of the electronic plaque that the buttons press on to make a connection. In fact clean everything

[Error404]

Yes, remove the unit, you will see 3 screws to remove the front of the unit. Remove the ribbon connector.
Pick off the glue on the locking tabs and remove the face - the buttons will come off with it so don't loose them! You can wipe clean all the buttons and the screen, plus the rubber contacts and the circuit board inside. Give it all a really good clean with alcohol or lighter fluid. Reassemble. It sounds more complicated than it is, you will see what I mean

[gabrielm]

Yes, remove the unit, you will see 3 screws to remove the front of the unit. Remove the ribbon connector.
Pick off the glue on the locking tabs and remove the face - the buttons will come off with it so don't loose them! You can wipe clean all the buttons and the screen, plus the rubber contacts and the circuit board inside. Give it all a really good clean with alcohol or lighter fluid. Reassemble. It sounds more complicated than it is, you will see what I mean

okay. I will do that. thank you!

[gabrielm]

If you take the unit out, remove the faceplate you can possibly open it and clean around the areas of the electronic plaque that the buttons press on to make a connection. In fact clean everything

okay. that's what I'll do.

[johne]

This may help:

http://www.s2forum.com/forum/showpost.php?p=388388&postcount=18

John