S4/6 rear ABS sensors 4A0 927 807 E

[shaun5]

Im doing a suspension rebuild on my S6 so changing all the wheel bearings, unfortunately you have to remove the ABS sensors on the rear and they are rusted in so the only way to remove them is to destroy them

Anybody got any? part number 4A0 927 807 E

Pretty sure only ones from a A6 quattro will fit.

[shaun5]

Bump

[Liam Gallagher]

The generic ones from eBay seem to work well. The one I purchased was listed for a C5 A6, IIRC, it worked fine. I just had to solder on the connector from the old sensor.

[roysterFR]

Abs sensors

You can change bearings with sensor in just remove cable from car under rear seat. The bearing doesn't damage it when pressed out

[shaun5]

You can change bearings with sensor in just remove cable from car under rear seat. The bearing doesn't damage it when pressed out

now you tell me it doesnt look like the bearings will go past the sensor without damaging it not on the rears any how.

[shaun5]

The generic ones from eBay seem to work well. The one I purchased was listed for a C5 A6, IIRC, it worked fine. I just had to solder on the connector from the old sensor.

Have you got a link for them

[roysterFR]

They deffinitely go past have changed about 8 there are sensors cheap on eBay that will straight fit have a search through Audi c4 etc

[shaun5]

They deffinitely go past have changed about 8 there are sensors cheap on eBay that will straight fit have a search through Audi c4 etc

just pushed my bearings out and you are correct you dont need to remove them

Anyway has anybody got any

[shaun5]

Bump. Need a couple of these ASAP, got the week off and want to fit all my refurbed parts.