VEMS firmware versions

[GazzaG60]

have posts dissapeared? think i may be having computer issues. testing a new port replicator.

yes it looks a pig to import. not sure of an exact utility. like i said peter has kindly offered to advise me on this update as i cannot for the life of me get mine above 1.1.44.

didn't know repo did vems. thought he did the higher end stuff. tactel, motech etc.

vemstune should do straight to 1.1.27 i think. mine does 1.1.27 1.1.44. and 1.1.57 IIRC. firmwares present.

there are some useful file compare programs and also if you go to review mode in megatune and screenshot it its a uselful excercise.

[GazzaG60]

anybody know of a updating your skils type doc between megatune and vemstune. i cant find easily what i want.

[Jamo]

i have entered mine all manually.i thiink you have to upload 1.1.27 to vemstune, make it into a vemsconfig file and then change it to 1.1.62 but i thought it was too complicated.

it took me roughly 45mins to put all the info manually

I think this is what Marc is investigating then as it would make for a pig of a convert to go from lower version if you have to re-enter everything.

I'm just playing with a map, do you know how to contact people of the Vems wiki?

Can't find a way to do it.

[A80Avant]

i think it is one of the worst online systems to communicate with other members on the wiki.
i find vems community forum much more helpfull

since 1.1.62 has different size maps, you will have to to some things manually anyway

i still dont understand what MAP corr. table is for...

[GazzaG60]

its woeful.

i have never got my head around wiki.

vems.co.uk seem to enjoy success due to that.

not looked into 62 yet. im gonna try for 57 first. gonna play with vemstune like Jamo is to see where things correlate then go for it.

[Jamo]

It's for the Alpha-N calculation when the MAP is unsteady.

Found an example on the Wiki http://www.vems.hu/wiki/index.php?pa...e%2FAlfaSpider

[A80Avant]

we dont use Alpha N on our cars

[A80Avant]

aaaa i see, so i get it now... more reading to do,although im confident that i can make a perfect idle on 1.1.62 as well!

[A80Avant]

jamo,

when i put 16ms on the boost PID controller settings, i get the RAW figure to 128. If i change that to 32, the PWM goes to 64ms. i cannot get both 16ms and 32 RAW config setting at the same time.

how did you do that ?

[Bram]

Bram keeps on racing his Avant instead of diving in to future firmware upgrades for now

[A80Avant]

haha, sure, but we are thinking ahead!

[Jamo]

I have no idea, ever since I messed with it I was reading the ini files so I open them up closed them the table reads correctly even if I load a blank map with no configuration.

The table shows correctly!!!

I'd have to reinstall from scratch to try and replicate it on a different machine

[A80Avant]

can you make a photo of the PID boost settings as you have them now?

which ini files did you look up?

i had a look in them trying to find the one that has the boost curve data to change it,but i could not locate it.

did you change anything from the ini files?

[Jamo]

I know what the problem is, it's the ini files for the various versions I hadn't noticed that it shows the ini version at the bottom of your project.

The ini for 1.1.27 gives you the correct table but any 1.1.5x or 1.1.6x ini gives the wrong table

I might try some sneaking messing

[A80Avant]

if you do try something out, send me the ini file that you have corrected so i can try it out

i tried looking in the ini files and couldnt find the boostcurve on the text to see what needs to be altered..