VEMStune crashes even without being connected to the ECU. Maybe it's time for me to check out the linux version of VEMStune 
-
-
To be honest it doesn't crash when entering fields on my old laptop I have for mapping / vagcom it's more stableComment
-
oldies but goodies eh.
i have tested on
dell d600,D610,D620,D630 - all good
ibm with usb -the one martyn had. not good
toshiba satalite, sat pro. old grey and old blach ones - 4200 series 4090, they work too.
problems with vems will come next 2 years as old laptops die and we are stuck with usb. vems need a good usb box like LINKECU.Comment
-
Or do the intelligent thing and develop a USB connrectionComment
-
sure it cant be far off. hopefully not an ecu change though.
VEMS may benifit from the extra bandwidth too of USB.
were a dell house here. i only buy dell now. i currently use a french D610. lol good job i can operate a pc in french.
sure somebody will come up with something soon.Comment
-
my laptop is old so carries a serial port. eventually im going to keep that for tuning purposes, and get a proper new one in the future
however i do wish there was a possibility to make a small 8inch one with serial port and windows xp. no need of a cd/dvd on it, just a small hard drive and a bit of memory to keep it from crashing.Comment
-
i have an old toshiba libretto with a docker. its around half the size of the glovebox, runs windows 95 and thats about it.
never tried it with vems. ill stick with the D610.Comment
-
as it has been updated in Jamo's vems page, version 1.1.63 is going to be released with the correction on kpa vs kpa! yeah!Comment
-
On my page It says there is a new version of vemstune to correct the issue in a released version after the date 2009-11-11.
There is a reference to 1.1.63 as the boost tables have been moved to a different section which means the error wouldn't occur again in later firmware either.Comment
-
yes that is what i thought, and i understood that the 1.1.63 will be released sometime after 11/11/09Comment
-
-
just did it!Comment
-
And yes RPM is corrected!!!!Comment
-
I Had 1.1.27 in my old S4, works great with stock sensors and reving 7500rpm.Comment
Comment