where maps s2's in west yorkshire??

[4WheelDrifter]

Do we have any evidence that Automark can custom map Motronic M2.3.2 now? I am yet to see any.

MBC or using an N75?

[prj]

Yes there is one sat in my garage..

Your car does not use the N75 valve though, does it?

Steves car with some massive KKK and about 700hp

On Motronic 2.3.2? Motronic 2.3.2 can't physically idle properly with injectors that are enough for 700hp. It is outside it's hardware specs.

[DJones]

MBC or using an N75?

He initially did mine with an N75 but i had no end of problems with the high boost i am using, i then went to MBC and now eboost2.

[prj]

How much boost are you running?

[DJones]

Your car does not use the N75 valve though, does it?.

Not what he asked.

[terrybullwon]

Your car does not use the N75 valve though, does it?


On Motronic 2.3.2? Motronic 2.3.2 can't physically idle properly with injectors that are enough for 700hp. It is outside it's hardware specs.

Well yes it Idles.

[DJones]

How much boost are you running?

2.2 with water/meth 1.7 without.

[prj]

Well yes it Idles.

Which injectors? What AFR at idle?

2.2 with water/meth 1.7 without.

I didn't have any issues running 2.3 bar boost on N75... on multiple cars.
It's just a magnetic solenoid valve. You can use a turbosmart solenoid if you like, does not matter.

[terrybullwon]

Which injectors?


I didn't have any issues running 2.3 bar boost on N75... on multiple cars.

Dunno ones that put fuel into the engine, i really dont have a clue

[prj]

Dunno ones that put fuel into the engine, i really dont have a clue

Well, I am sorry if I am a little bit skeptical about you throwing up a number, then stating it can idle properly (and I don't mean flooding the engine with O2 trim codes) at that power level, when the hardware and software of the system is not really designed for it.

[DJones]

Which injectors? What AFR at idle?


I didn't have any issues running 2.3 bar boost on N75... on multiple cars.
It's just a magnetic solenoid valve. You can use a turbosmart solenoid if you like, does not matter.

Well done you, this thread is not about your abilities. I dont deny they are good just dont want to keep hearing about them.

[prj]

Well done you, this thread is not about your abilities. I dont deny they are good just dont want to keep hearing about them.

It's not about my abilities. I am sure Mihnea and a lot of other tuners in Germany can map a car to run whatever boost on a N75 valve (or any other magnetically actuated boost solenoid) as well.
It is not that special, there are just certain nuances on higher power cars.

What is special is the statement from James that a car can have 700hp on this old Motronic and idle properly. I'd really like to see that.

[terrybullwon]

Well, I am sorry if I am a little bit skeptical about you throwing up a number, then stating it can idle properly (and I don't mean flooding the engine with O2 trim codes) at that power level, when the hardware and software of the system is not really designed for it.

Skip to 1.22

http://www.youtube.com/watch?v=PNpqpT7F_-k

[prj]

Skip to 1.22

http://www.youtube.com/watch?v=PNpqpT7F_-k

That does not answer anything.
1. What injectors did it use?
2. What AFR did it run at idle?
3. Who says it has 700hp?

[terrybullwon]

That does not answer anything.
1. What injectors did it use?
2. What AFR did it run at idle?
3. Who says it has 700hp?

Yes your right sorry i just made the whole thing up for no reason