Emulator Ostrich

[karel5000]

Hi,

I have some questions about the Eprom emulator Ostrich 2.

I have audi 200 20V 3B. One of the Eproms is 27C64. Is it possible to emulate this chip with the Ostrich 2 emulator? Eventually do you know something what supports this chip?

If I use an emulator for the emulation of Eproms, do I also need a file with the names and addresses of tables? (For example for the software TunerPro?) Or using emulator I do not need such a file? The emulator finds it for me automatically? (Addresses and names of tables, units of axis...)

Thanks very much for your help,
Karel5000

[blackS2]

You need two files - an you have to figure out the whole s**t on your own before you get any benefit from it... hours and hours and weeks and months of work....

[prj]

Hi,

I have some questions about the Eprom emulator Ostrich 2.

I have audi 200 20V 3B. One of the Eproms is 27C64. Is it possible to emulate this chip with the Ostrich 2 emulator? Eventually do you know something what supports this chip?

Yes, it will support it. 27C64 has similar pinout to 27C256 and 27C512, just fewer address lines.

If I use an emulator for the emulation of Eproms, do I also need a file with the names and addresses of tables? (For example for the software TunerPro?) Or using emulator I do not need such a file? The emulator finds it for me automatically? (Addresses and names of tables, units of axis...)

Yeah you need a file, and you need to understand how the tables work between each other.
No such files are publically distributed though.

Look at this thread for some ideas:

http://www.s2forum.com/forum/showthread.php?t=18390

If you only want to tune your own car, I would not bother and go to someone who knows how to map this ECU.

[karel5000]

Thanx very much for the ideas,

Karel5000