You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
To be 100% safe, you should make a little adapter between the rs232 port in your harness and your bluetooth device, where you only leave TX, Ground and 5v.
If you ditch the RX cable, no info can get back into the ECU.
Forgot to mention that. I only connect the TX and ground to the Blue-tooth. And power from 12v.
I will make some changes in te blue-tooth settings and try again.
Do somebody know the baud-rate is 19200BPS?
Just to be clear, this has nothing to do with the LCD settings, or the LCD connector on your ecu. You connect the bluetooth module to the rs232 instead of the PC.
The AIM Enabled setting is the only thing that needs to be enabled in Vemstune.
hello
old thread i know. but is still something you can get working? when on vems.hu it seems like it not just pnp? does it still change the maps or what ever the thing was it had problems with? regards chris
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment