part number

[s2driveruk]

Ok so came to replace the 2 hose/hardline with rs2 hardline and new flexihose and managed to round the nut as its not moved in 13 years.....even after copious amounts of penetrating oil..... it was so brittle it just rounded right off.

So does anyone have a part number for the hardline which is on the body which connects to the first flexi going out to the strut?

Cheers,

David

[4WheelDrifter]

I had this problem when I did my brake upgrade. I just cut the old nut off and replaced it. Luckily there was enough slack on the old hardline to reflare it.

[s2driveruk]

how easy is it to reflare - is there a tool or something???

[4WheelDrifter]

Yeah there is a tool, in my garage somewhere.

[4WheelDrifter]

If you haven't got a tool it's probably cheaper and easier to get a new pipe.

rhd N/S brake pipe 650mm flanged - P/N 191 611 994 F
rhd O/S brake pipe 1500mm flanged - P/N 191 611 996 D

[s2driveruk]

yeah i dont have one so thanks for the p/n

cheers
david

[4WheelDrifter]

Got there in the end.

[s2driveruk]

lol cheers Stu I'll go ahead and order the o/s loooong pipe and no doubt enjoy the refit...NOT

[4WheelDrifter]

Oh no. Not the long one. That's the one I avoided changing. Good luck. Or shall I drive up with my flaring tool? LOL

[s2driveruk]

lol how did i know u were gonna say that - where are u based?