You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
can some body measure there pad swept area on the front oem discs and hat height please as I want some two piece discs making but haven’t got the discs in front of me.
This is info I have so far 276mm diameter and 25mm wide the hat height 56.2mm and hub centering diameter hub 68mm hole. Just need the pad swept area on the disc outer edge to inner edge please.
It might vary between disc manufacturers but I have measured 57mm on the front face and 58.2 on the rear face of a Tarox replacement 276mm disc. You might get more accurate dims of a technical drawing. Can't seem to find the Brembo one online. Might have it saved somewhere.
Not sure what you are trying to achieve but usually a bell eats into the annulus!
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
can some body measure there pad swept area on the front oem discs and hat height please as I want some two piece discs making but haven’t got the discs in front of me.
Comment