Front braided lines - CQ20

[Error404]

I'm refurbing my front brakes on the CQ and after replacing the rear lines with braided items, i wanted to treat the front to the same.... i'm a little confused though... as on my CQ the front solid line comes out into the wheel arch, connects to a flexi line, then to another solid line around the strut, then to another flexi line to the caliper

will a Vagparts braided kit for the front replace both these flexi lines and the solid pipe, or just the lower flexi line to the caliper? Seems a bit pointless replacing just one part of the old rubber hoses

can anyone enlighen me?

cheers

[s2driveruk]

From memory it replaces it but i cant remember the combination. I think they just have braided pipes to the strut hardline and then to the hardline on the arch.

[Error404]

ah ok, i'll ask them when i order what i get... seems funny they'd charge the same for 2 rear lines as for 4 up front

[Flat on my back]

Well...

Yes, two lines per side as on my 90 fwd, got mine made by Merlin Motorsport at CC.

Ring Vagparts and ask 2 , or 4 lines per kit. You need 4 really.

[Error404]

indeed. i'll check

Thanks Carl

[shortsport]

Try Rally design and make your own works out a dam site cheaper than buying ready made
http://www.rallydesign.co.uk/catalog...ath=85_248_249

[Flat on my back]

and...

cut the lines with the thinnest grinding disc you can find in a dremel tool. SS are nice but v.expensive, plated will rust after a bit and alloy only on race cars or showy ones that dont really get driven anywhere!

Or Pirtek, they do lots of goodies.

[Azman]

I got mine off the tinterweb thingy at the bay of theives... I checked and got the set for the 100 turbo, it has both sections for the front....
BF goodrich BTW