RS2 rear brakes on Coupe

[The Spanish]

Jeffer,

Just a reminder to do the measure if you don't mind

Rafael

[Jeffer]

I had a brief look at it, but i couldn't get the bolt all the way in the cv to drive off the cv joint. But as I said it was brief. So tommorow I'll look in to it more seriously. The shaft is in the boot of my car wandering around. so I wont forget it.

Cheers.

[The Spanish]

Jeffer,

Any updates?

Rafael

[Jeffer]

Yes,
Finnaly. I removed the cv boot and i could just measure the shaft. I measured 27 mm diameter on the rs2 driveshaft.

Greets,
Jeffry

Jeffer,

Any updates?

Rafael

[The Spanish]

Thank you Jeffer, but what about the rest? (See picture)

Yes,
Finnaly. I removed the cv boot and i could just measure the shaft. I measured 27 mm diameter on the rs2 driveshaft.

Greets,
Jeffry

[Jeffer]

I do not have a S2 drive shaft lying around. So cant measure those figures. I know for sure the shaft that goesin the rs2 wheel hub is larger then a s2 shaft. I'll measure the thicknes of the rs2 shaft. and length of cvjoint

Cheers