Looking for RS2 bracket dimensions

**Le S2 Audi** · 2 July 2010, 18:19

This is a drawing I did of the actual calipers, it has nothing to do with the actual mounting bracket.

I can't help with the bracket sizes, sorry.. I used a bought one from Kev Bambridge..

If you have access to a machine shop can you not measure one up yourself???

Good practice for a "Poor" Student... No??

**Kieron20V** · 2 July 2010, 18:24

Bambridge might be able to help you out, or alternatively, if you have a hub carrier and a hub it shouldnt be too hard to measure up for dimensions, especially in a machine shop.

**Jamo** · 2 July 2010, 18:29

The bracket dimensions have been posted on the motorgeek site

**chezz** · 2 July 2010, 18:49

Originally posted by Le S2 Audi

This is a drawing I did of the actual calipers

Leonardo Da Vinci would have little to fear from your technical drawing abilities then!

**Le S2 Audi** · 2 July 2010, 19:09

Originally posted by chezz

Leonardo Da Vinci would have little to fear from your technical drawing abilities then!

He must have had a ruler and more time than me...

**oldsklaudidub** · 2 July 2010, 20:07

...

**Jamo** · 2 July 2010, 20:36

Dont want much do ya?

sorry I don't ( p.s if you click on the pics it enlarges them

)

**oldsklaudidub** · 2 July 2010, 20:42

...

**bambridge** · 2 July 2010, 21:08

If you have cad-cam, , just draw it, download it, and make it

**oldsklaudidub** · 2 July 2010, 22:12

...

**spink** · 2 July 2010, 23:52

Originally posted by oldsklaudidub

They going om my 5ktq. I am going to run some Boxster S calipers with some S8 or A8 rotors (still need to figure out the offset)

a8 discs are useless on a type 44 mate,offset is far too big.I used 321mm S4 B5 discs machined down to about 312mm using modded rs2 rep brackets with boxster S calipers,job done

**oldsklaudidub** · 3 July 2010, 00:50

...

**oldsklaudidub** · 3 July 2010, 04:21

...

**spink** · 5 July 2010, 10:08

Originally posted by oldsklaudidub

The Audi A8 312x25mm rotor is what comes in most of the Porsche brake upgrade kits for the T44's. I am also running larger wheels, Avus 16x7.5 with 37et.

Is the offset wrong for the Boxster S calipers, what exactly was the problem?

ok i stand corrected,i have never come across those before, those discs (46mm hat) were never fitted to euro A8s just north american from what i can gather from Brembo catalogue.Thats why i used the s4tt discs as they are very similar.

Do boxster S calipers work ok with 25mm thick discs?(think these were 30/32mm on 911s) Non S calipers on boxsters used 25mm discs

Looking for RS2 bracket dimensions

Looking for RS2 bracket dimensions

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment