Is this the wind back tool I need for rear caliper maintenance?

[S2audiS2]

http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_567081_langId_-1_categoryId_165572

Or is there others, cheaper?

Thanks

[s2driveruk]

that would be a bit overkill for the job as it looks to have multiple plates for many caliper/piston sizes. Laser do a generic version for about £20 from memory which I have and does the job on all my cars save yourself some money and buy that one i'd say.

[quattrostyle]

I got exactly the same kit, but for about €50,- so yes it's a bit too expensive if you ask me.

[mouse]

Has anyone used the cheaper 'wind back cubes' ? which just fit on the end of a socket drive.. will they be any good on the S2 rear calipers?

[S2central.net]

never seen those cubes before but looks a good idea for occasional use.

[s2driveruk]

i have one of these...i think you need the plat to help apply piston return force as well as windback...not sure how the cube will achieve that. http://www.amazon.co.uk/Brake-Piston...f=pd_sim_diy_2

[simon20vq]

I just use water pump pliers and a cloth does the job a treat for a tenner max and how often do you need to screw the piston in?

[Condor]

http://www.halfords.com/webapp/wcs/s...egoryId_165572

Or is there others, cheaper?

Thanks

Lots to pick from on ebay, I've been looking at getting a cheap one myself.
http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

[quattrostyle]

http://www.koopgoedkoop.nl/gereedschap-1/autogereedschap/universele-remzuiger-terugstelset.html?network=cleafs

[S2central.net]

I just use water pump pliers and a cloth does the job a treat for a tenner max and how often do you need to screw the piston in?

pliers are ok on a fresh caliper but I have needed the proper windback tool on older / stubborn ones

[mcandmar]

I use the cube thingy, only costs a fiver or so. As above you do need to press it in while twisting but works fine.