Boxster S and RS2 brackets - does it work on Euro S2s?

[UrS4boy]

As above, i had a piece of steel plate cut to size. I wouldn't use washers, not enough surface area in contact.

Something like these? (from Apikol):

http://apikol.com/products-page/brake-components/caliper-bracket-spacer-shim-94-mm/

[Error404]

I was meaning moving the caliper away from the hub radially but that would of course work to space it axially although in that instance a large washer would work fine as Jonas showed above. You want to use a spacer with surface area as big as the mounting surface area for stability

[UrS4boy]

I was meaning moving the caliper away from the hub radially but that would of course work to space it axially although in that instance a large washer would work fine as Jonas showed above. You want to use a spacer with surface area as big as the mounting surface area for stability

So same idea, just in the other direction.

[mcandmar]

[90quattrocoupe]

I was the one who wrote the article, in 2004, the OP linked to. Being a backyard mechanic, I bent the ends of the spring up over the rotor to increase the distance needed to clear the rotor. I know tacky. But 30,000 miles and 12 or so track events, I have never had a problem.

Greg W.