Remove ABS --> ware brake lines on master cilinder.

[V6quattro]

Maybe a stupid question but i removed the ABS system so now i need to make new lines.
Does it matter ware i connect the front and rear brakes to the master cylinder?

[mrtat2k9]

rear brakes to front of cylinder and front brakes to the rear of the cylinder i found out the hard way under hard braking rears locked up and put us backwards over a roundabout. but since a put the rears on the front off the cylinder much better hope this helps

[V6quattro]

Thanks mrtat2k9!

I will also use a manual brake bias valve to prevent the rear brakes locked up.

[mrtat2k9]

i dont have one and they only lock up when iv just about come to a stop.

[V6quattro]

Good to know. I'm also planning to instal big Porsche rear brakes and hydro handbrake soon so that's way i have the manual valve.

[mrtat2k9]

ok but im running 300 s4 rear brakes with the 996 front up grade