S2 Coupe Brake Lug Dimensions

[Error404]

I have rear hub carriers too. I believe front & rear are the same but I will check.

[montyrs2]

All help much apprecited.

Need it for front and rear too. Just makes life easier than either taking it all off the car or trying to measure it on the car.

[Error404]

I have a hub carrier at home so I can measure the radial dimension.

Sorry I can't help with the axial offset from hub face to the lug as the carriers don't have hubs in them.

[montyrs2]

94.0mm

Thanks error but what I meant is this.

At a high level the hub and lugs look a bit like this.



To mate the callipers and discs together I need a custom bracket, so I need to know the offset between the hub face to lug mounting face.



Then I need to know the radial dimension from the hub centre to the centre of the lugs.



I can then measure and sketch the discs and callipers and sketch out a bracket. trouble with the hub ii it will be difficult to measure accurately on the car.

Cheers

[Error404]

94.0mm

[montyrs2]

no one

[montyrs2]

Good morning all.

So as the poly bush upgrade nears completion I find myself looking towards the next project, which has to be the brakes.

The question to the forum is does any one have any dimensions for the hubs to brake lugs. I am a CAD user and have access to machine shops etc so making up brackets etc is easy stuff but some drawings with dims already measured and used will be a massive help.

Thanks in advance.