Front s2 hubs

[Gazmitchell]

Can someone tell me what the distance centre to centre of the caliper bolt holes on standard front hubs please .. Cheers

[Error404]

94mm

[Gazmitchell]

Great thanks. I'm struggling to get the kit together to get these Gt3 4 pots on my motor !

[Error404]

What discs are you using?

[Gazmitchell]

Well I think I want the A8l armoured a8 discs according to Wil at VRS .. They're 330 x 30 odd I think .?

Wanted to use my standard 16," Avus but gotta be 17" looking at every upgrade thread I can find ! It's the brackets I'm struggling with .. So 94mm x 145mm would be bolt hole spacing then I need ..

[_ShurikeN]

16" Avus can be used with RS2 calipers and 323x30 brake discs.

[Gazmitchell]

Ok but I've a set of 429/430 calipers....

[Vorsprung durch Technik]

I thought 429/430 fit under the 16"Avus?

[andy10v]

I thought 429/430 fit under the 16"Avus?

425 and 426 fit under 16" Avus with 314mm discs.

[Vorsprung durch Technik]

Thanks Andy.

[Gazmitchell]

Further to this just a thought - tell me if I'm being thick - but most of the larger thicker discs ie R32 discs etc are 100 pcd so can't I just fit hubsentric adapter 112 to 100 then I can fit discs of choise and then obviously 17 " s3 avus or whatever over my 996 T calipers with a 100pcd adapter for the caliper .....?

[A1QSHIP]

Further to this just a thought - tell me if I'm being thick - but most of the larger thicker discs ie R32 discs etc are 100 pcd so can't I just fit hubsentric adapter 112 to 100 then I can fit discs of choise and then obviously 17 " s3 avus or whatever over my 996 T calipers with a 100pcd adapter for the caliper .....?

Um... R32 disc is 5X112 pdc. 30mm thick & 345mm diameter. Center bore is 65mm.

[Error404]

MK4 are 334x32 floating, in Europe at least.

[Gazmitchell]

Yep what he said , suppose it would depend on hat height for it all to fit together..

[Error404]

They are quite expensive discs, and not a straight fit.