Some Brake Upgrade for the S2

[Ruhmic]

Hello,
a few months ago somebody has asked me whether I am able here to do some information about my braking conversions that I have done. I will start with the last conversion that I made.
The car from these conversion is the S2 Avant. For the S2 Coupe the conversion did also match.
These parts used for the conversion:
RS3 4-Pot Brake calipers with pads (New Version)
RS3 370x32 Brake Discs (Centre hole machined)
RS2 Brake Line
Audi Original Bolts
Bracket self designed and CNC machined from a friend.
Mounted wheels on the car: Sportec Mono 10, 8,5x18 ET35

[GazzaG60]

think there may already be a thread like this.

heres mine though and sources and approx cost

gt2 6 pot - ebay £300
993 tt disc - ecp £120 each
hel custom line 650mm 2 grommet (as per ebay s4 brembo lines they sell but longer and extra grommet) - £50
custom bell and custom bracket - cant remember bout 300-400
pads - ebay £20
fits under 17" wheel

[Ruhmic]

RS3 Brake Kit

Here are some photos from the parts of the conversion.
The discs are machined at the centre hole to fit at the S2 Hubs.
The brackets are designed to Fit for the S2 conversion and for the A4 B5 with the disc from the TTRS

[Ruhmic]

Mounted

Here are some pictures from the mounted bracket to the car and Brake calipers

[Ruhmic]

Mounted

Some more pictures from the mounted parts.

[Ruhmic]

Mounted

Here some more pictures with mounted wheels

[Error404]

Very nice
Did you also do a R8 rear conversion with brembo handbrake caliper a few years ago?

[Ruhmic]

R8 Brake conversion

Thank´s Error
Yes the R8 solution with the Audi Handbrake caliper was built from me.
In the next weeks I will post more from conversions that we have done for the S2 or the Urquattro.

[Ruhmic]

Costs for the RS3 Brake conversion

For the interested people here some information about the price
The complete costs for the RS3 conversion was at 1350€
The parts where all new.
The most parts I have bought in Auctions at ebay.de
New Brake calipers with pads: 650€ in ebay
New Brake disc: 300€ in ebay
Brackets and disc machining: 300€
Bolts and RS2 Brake Lines: 100€ by the Audi dealer

When you get some used parts you can built it much cheaper then the 1350€

[Rusty]

Good work

Looks like a similar caliper to the Porsche Monoblocks. Looks like an interesting caliper to use to fit under 17s with something a little smaller in diameter.

[morgenlatte]

i also have the TTRS calipers with 330mm discs under 17" wheels.. fits very nice (not on a s2 but possible with adapters)

[GazzaG60]

nice, looks good

[diesel des]

Are those 2 part disks?

Sent from my LG-H955 using Tapatalk

[Error404]

Yes kind of, the they are single piece but the hat is alloy, the rotor is suspended on spokes do they are "floating"

[diesel des]

Interesting setup. Anyone really push them to see how they get on with heat. Do they warp or stick it ok?

Sent from my LG-H955 using Tapatalk