Is there a disc available with the same dimensions as the 323x30 A8 disc, except with a larger diameter?
-
Armoured A8/S8 uses a brembo sourced 345x30mm disc, about £130 a pair from proven products if i remember...
HTH
Davidsigpic
1992 3b S2 Coupe -
-
Just under £100 from the stealer, each that is. Got a pair waiting to go on the S6 once we have bigger wheels. They will fit within a 17" but not with a 996 Carrera Monoblock, you would need the 6 pot from the GT3.Corey
01636 822288Comment
-
-
Question is why would you want larger than 323 with the Porsche Mono Blocks?
With Ferodo Pads they're stonking.Last edited by Jamo; 20 March 2005, 02:40.Comment
-
Brakes can never be big enough
If i had some brackets made up for my hi-spec calipers i guess i could use those 345mm disks as they are the same width??
sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
Originally posted by audimanBrakes can never be big enough If i had some brackets made up for my hi-spec calipers i guess i could use those 345mm disks as they are the same width??
Tom,
Yep! They are identical except larger diameter.
PM me if you are interested in a set.Comment
-
Mmmm, ok Robin I might just do that. I also have a little pressie left at my house for you
Time for me to have a chat with Lee, so he can do his first bit of design for MRC Tuning!!!
sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
Not the first for MRC Tom
1995 S2 Avant with some upgrades
Designun Limited....
Aerospace, Space and Motorsport Design Consultancy and hardware supply.Comment
-
This looks like a good viable option as the discs retail for about 71+VAT each from Audi!! Then i have the cost of the brackets, but that is only gonna be 20 quid i guess LMAO. I wish!! I have some spare box section from my crossmember, i could make my own 
345x30 discs!! Should fill the 18" wheels up a bit better!sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
They must weigh a ton though.
The 323's are heavy enoughComment
-
Yeh! pretty heavy for a disc but the weight is offset (on the S6) by the removal of the stupidly heavy HP2 caliper setup as standard.Originally posted by martinjs
I like the thought though of a heavy one piece cast disc though, they make a very effective heat sink which helps to prevent the discs warping. So they can be abused more!!!Corey
01636 822288Comment
-
I couldn't get over the weight difference between the 323mm disc and the split bell/rotor I took off my car!Comment
-
Which was heavier?? The 314mm discs are damn heavy. Even Big red discs are heavy as hell.sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
Comment