996 Monoblock + A8 323 Disc Fitted

[Dave cook]

many thanks Bibby

[rotoryboy]

Does anyone know what 4 stud disc would work with the 996 caliper?

[90quattrocoupe]

Does anyone know what 4 stud disc would work with the 996 caliper?

Hi,
I was looking into this when I was first considering the conversion. All the coupes in the states are 4X108. I didn't want to have to buy new wheels. Thought I would keep the expense down. I even thought about having some 5 bolt rotors redrilled to 4X108.

But here is what I ran into. All the front 323 rotors, or 314 for that matter, I could find all had 10 holes in them. Brembo, Zimmerman, or Ate. I couldn't find any with just 5 holes. Slotting one of the holes and drilling 3 new holes, I felt, would have weakened the rotor.

So to make a long story short, I never found one.

Greg W.

[Jas11n]

Pembo is using porsche calipers on the 20V turbo'ed CQ rally car Mark. IIRC he said the discs/bells are metro 6R4.
I think wab has brembo's (not sure which type?) and is still running 4 stud hubs.
Don't think there is an "off the shelf" disc, well ! not an audi one at any rate.
Tim may be the best source for custom rotors, he gets the bells made up especially to go along with the brake kits he does. Remember the Cricket green 2.8 V6 coupe at the QRSport meet? that has big discs on with bremsports calipers, and is still running 4 x 108 hubs)

Jas

[stevieyid]

Hi if u dont mine me asking how much did the whole conversion cost u? Im currently considering this as my next upgrade.

[S2 Ant]

Hi if u dont mine me asking how much did the whole conversion cost u? Im currently considering this as my next upgrade.

Complete cost of the upgrade, for pads, discs, calipers and mounting brackets is around £500, well worth the money.... future replacement parts ie discs and pads arent too bad to do once the initial cost is out the way