hey guys, im going to try and get help via here because i have a situation with the brakes. i revised my frond brake calipers and put 2 brand new ones in the rear and after that air kept being in the system.
I replaced the master cylinder
replaced the hydraulic bomb
replaced the hydraulic servo with a non leaking unit
replaced rear calipers
removed the abs
removed the valve that reduces pressure to rear brakes when lifted since it was stuck
bled the system over a dozen times manually and machine wise
now it just goes down a little, brakes well and after the second pump the brakes work mint. Then after a drive again the small spongy feeling just a tad and then after another press again good brake pressure. i cant figure out whats wrong its terribly frustrating.
I replaced the master cylinder
replaced the hydraulic bomb
replaced the hydraulic servo with a non leaking unit
replaced rear calipers
removed the abs
removed the valve that reduces pressure to rear brakes when lifted since it was stuck
bled the system over a dozen times manually and machine wise
now it just goes down a little, brakes well and after the second pump the brakes work mint. Then after a drive again the small spongy feeling just a tad and then after another press again good brake pressure. i cant figure out whats wrong its terribly frustrating.
Comment