996 351 425/426 Boxster s front brackets

[mac2226]

Can some one point me where I can get some of these please or can I use seat cupra r brackets I've read some where?

[vonbeck]

yes you can use cupra brackets but if i remember correctly there is some machining involved from either one or both faces about 3/4mm and theyre fecking hard do a search as Im not 100% sure

[kj6304]

yes you can use cupra brackets but if i remember correctly there is some machining involved from either one or both faces about 3/4mm and theyre fecking hard do a search as Im not 100% sure

Apikol has good one for $239.00 for Audis. Make sure you order the right ones.

http://www.apikol.com/index.php/products/braking/urs4-s6-boxster-s-brake-brackets.html

[mac2226]

Thank for quick replys so just done some more searching and got my answer so 323mm s8 d2 discs are to be used with seat cupra r brackets machine down. Also it said there could be some rubbing from discs once they get hot any one who has had this on the 323mm discs and caliper setup?

[orsum]

I have this setup with 321 discs, not fitted just yet but will be in the next 6 weeks.

I will be interested on how your fitting goes.

[mac2226]

I have this setup with 321 discs, not fitted just yet but will be in the next 6 weeks.

I will be interested on how your fitting goes.

Will let you know mate

[vonbeck]

I run this very same set up have for years with A8 disks with no problem what so ever

[90quattrocoupe]

I used RS2 carriers and did mine this way.

http://forums.fourtitude.com/showthread.php?1315513

Greg W.

[mac2226]

I used RS2 carriers and did mine this way.

http://forums.fourtitude.com/showthread.php?1315513

Greg W.

Thanks Greg