Larger rear disc using original callipers on my Audi S2 ABY Coupe. Fitted with 17”Audi Avus rims.
Getting the callipers I would prefer and new carriers and all the other bits in South Africa is a problem hence I am looking for an alternative solution.
I am looking at this option disc from the Audi Allroad C6.
Diameter (mm): 302
•Thickness (mm): 12
•Min (mm): 10
•HT (mm): 42
•B (mm): 68
•N: 5
•Type: Solid
•OE Ref: 4F0615601G
So yep its 12mm thick. The standard is 10mm is 2mm that such a big issue?
Another concern it the height 40mm is the standard, 42mm on the new disc is 2mm such an issue?
Mounting brackets would have to be made but it seems to me to be quite simple.
The standard diameter is 245mm, now it would be going to 302mm. Should improve the rear braking.
I have the 996 upgrade on the front with 321mm diameter discs.
What if anything will happen to the brake bias. Everything else on the brake system is standard.
Will the handbrake cable be an issue?
With me not being a Brake Guru could one of the Gurus like to offer any advice?
Getting the callipers I would prefer and new carriers and all the other bits in South Africa is a problem hence I am looking for an alternative solution.
I am looking at this option disc from the Audi Allroad C6.
Diameter (mm): 302
•Thickness (mm): 12
•Min (mm): 10
•HT (mm): 42
•B (mm): 68
•N: 5
•Type: Solid
•OE Ref: 4F0615601G
So yep its 12mm thick. The standard is 10mm is 2mm that such a big issue?
Another concern it the height 40mm is the standard, 42mm on the new disc is 2mm such an issue?
Mounting brackets would have to be made but it seems to me to be quite simple.
The standard diameter is 245mm, now it would be going to 302mm. Should improve the rear braking.
I have the 996 upgrade on the front with 321mm diameter discs.
What if anything will happen to the brake bias. Everything else on the brake system is standard.
Will the handbrake cable be an issue?
With me not being a Brake Guru could one of the Gurus like to offer any advice?
Comment