S6 rear calliper to hub bolts.

[Vorsprung durch Technik]

Just rung Audi for 4 of these bolts (N 10038801 socket head bolt with hexagon socket head 10X1,25X50 ) and they want £11.50 each and i need 4

Is there an alternative supply of these? Cheers Mark.

[AndyP]

Search on EBay, they'll be a fraction of that price.

https://www.ebay.co.uk/itm/231388117504

[Vorsprung durch Technik]

Search on EBay, they'll be a fraction of that price.

https://www.ebay.co.uk/itm/231388117504

Thanks Andy, sorry to be thick on this one,would that link be the right thread pitch and length of bolt.At times like this i wish i had trained as an engineer.

[LHD_Kid]

you put the exact size in your opening post ....

[Thuppu]

M10 has 1.5mm pitch.

[LHD_Kid]

M10 has 1.5mm pitch.

Unless its fine thread, in which case its 1.25......

M10 standard thread is 1.50

[_ShurikeN]

N10038801 bolt size is 10X1,25X50

Rear brakes bolts are non-standard thread. Perhaps It's common for high-tensile bolts.

[Error404]

10 x 1.25 x 50 - easy to find, standard fine pitch. Go to your local fastener supplier, or try ebay etc.
You need minimum grade 10.9, 12.9 is stronger and might be easier to find.

[LHD_Kid]

I'm not really sure why all the debate?

Click on Andy's link. Choose M10 x 50mm , pack size 4 and order...

They are 12.9 and standard fine thread... 1.25

£4.05

[Error404]

[Thuppu]

Unless its fine thread, in which case its 1.25......

M10 standard thread is 1.50

Yes well, then it is M10x1.25, but M10 is always 1.5mm.

[LHD_Kid]

Yes well, then it is M10x1.25, but M10 is always 1.5mm.

I agree, but nobody said standard M10 (except you...)

The OP quoted 1.25 as pitch in his post and Andys linked to 1.25..............

I'll get my coat....

[Vorsprung durch Technik]

you put the exact size in your opening post ....

Copied and pasted from 7 zap. Means fook all to me.

[Thuppu]

I agree, but nobody said standard M10 (except you...)

The OP quoted 1.25 as pitch in his post and Andys linked to 1.25..............

I'll get my coat....

Sorry for messing up, looked little bit sloppy at the ebay link, thought they where basic M10 bolts... It clearly states M10x1.25, so my bad.