"Motorway turn signal" like in the newer Audi...

[Jamo]

Will you be selling them as kits then Martyn?

[Martynf]

Ar, I see its a cut and shut job Ben! this will fit loads of cars and its pretty simple to do (ish) as long as you can access the indicator wiring from the relay board under our dashboards, then its a quite straight forward task.

If anyone has ever removed the S2 stowage tray under the dash and looked up, you'll know what a jumble of wires it is up there!! you need to locate 5 wires and T into them so you can pick up the signals for this new relay to flash the indicators, that's all there is to it on one of our cars. This is the 'standard car kit BEn, the Golf MK4 and Passat kit is a lot more involved to fit than ours!! :-)

I think this would fit 90% of all pre 97 cars quite easily! I'll post up the fitting instructions soon

[Martynf]

If anyone wanted to get one from us yes, they are not going to be huge sellers I dont think, and I dont want to take anything away from RS2cabrio as he started this post.

There seem to be two kits, one is for cars that have the turn signal relays built into the hazard light switch, then one for all other 'normal' earlier cars, like our S2, UR S4, RS2, 90, 80 Coupe Etc

This is our fitting instructions: http://www.partsforaudi.info/s2/standardrelay.pdf

Or in short hand summary. Locate the indicator relay wiring. Identify the wires going to it, join into these wires one at a time. Test, finished.

[S2central.net]

You do love your gadgets... Me personally would just keep my finger on the signal for a few blinks - I don't see this as a particularly useful feature... I'd hate one to fail and keep an indicator flashing for longer than it should. Each till thar own I spose........

[s2avant]

How's that for luck!! Mine aren't due to land until the end of January

Ben

[Corey]

I'm confused whose selling these then?

[s2avant]

rs2cabrio (Christian) is selling them.

Ben

[S2 Ant]

From the instructions it sounds like you programme the relay once its fitted.