Nah, you won't feel anything if the rods are slightly bent, until it comes poking out the block.
Announcement
Collapse
No announcement yet.
PRJ chip set.
Collapse
X
-
-
PRJ, I cannot find that turbo,(EFR7163) with the 0.7A/R housing listed anywhere, only with a 0.8 or 0.85 housing.
Have you had any experience of this particular turbo on an i5 application? Do you have a chipset and injectors recommendation for this setup.
Please list the process of enabling this setup to work on an aby S2. For example, no MAF, custom oil
pipes, downpipe, which manifold, N75 etc....
I am arranging for forged conrods to be installed.
Comment
-
It was a typo, 0.8 A/R, but you will need to go standalone or find someone who wants to tune on prjmod.
Comment
Comment