Announcement

Collapse
No announcement yet.

window washer pump

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • window washer pump

    Hi .. im trying to get the pump to work.
    I have a container in the back.
    In front no container, the window wipers activates when i pull on the lever.
    Should there be a container in the front ?
    What color on the cables is it if there is a container in the front ?
    And where do they come from ?
    The cables in the back does not give anything when you measure them when i pull the handle for wipers.
    The realy in engine room is 229 ,, but is there a fuse to for the washer container/pump ?

    Best Regards


  • #2
    You should have another container in the front, behind the LH headlamp?

    Most likely the pump failed, they aren't that great.

    Comment


    • #3
      Ok ,,i mesaured the cabels back to the pump .. no voltage.

      In the front container,, what color is it on the cables ?

      Comment


      • #4
        The filler for the washer bottle is the light blue cap. The bottle is behind the front bumper. Best way to access is to remove the wheel and the arch liner and you will see the bottle and pump.
        The rear wash wipe is activated by pushing the lever forwards.


        S2 Coupe 3B Project


        Ur quattro restoration

        S2 Avant

        Boost is the new rock and roll!
        sigpic

        Comment


        • #5
          the container is missing ,, and i need to know the color of the cabels that goes there ,, have a lot of cables from harness left ,,

          Comment


          • #6
            Cable colours will be on the wiring diagram on S2 central

            S2 Coupe 3B Project


            Ur quattro restoration

            S2 Avant

            Boost is the new rock and roll!
            sigpic

            Comment


            • #7



              S2 Coupe 3B Project


              Ur quattro restoration

              S2 Avant

              Boost is the new rock and roll!
              sigpic

              Comment


              • #8
                While we're on the subject of windscreen washer pumps, I had an E30 BMW in the last century which let the washer pump squirt for a second before the wiper motor got power to wipe the screen. It was a brilliant idea. Time delay to save wiper blades. Worth investigating......

                Comment


                • #9
                  Hi Newsh ... At the current flow diagram ,,, 73/7 ,,, The rpm signal is G5 ... and it connects to T26a ,, that is connector 26 pin .. blue .... but how can i find out which is the blue on the connector its self , without cutting the wire to ping its the sw/bl wire that goes in to the connector ... im not 100% sure how to read the diagram ,,
                  what does T26/16 , C15A , 81 , 78 mean on the line that follows G5 ?

                  Best Regards

                  Comment


                  • #10
                    green/red from the relay/engine

                    V5 is the motor itself

                    0.5 - brown to earth
                    https://www.s2forum.com/forum/member...-3b-1991-coupe

                    Comment


                    • #11
                      Great .. looked a little extre when i calmed down and saw how it worked.

                      Comment

                      Working...
                      X