You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Yes check all relays and fuses but if turning mains on, turns off the dips then I'd be suspicious of a wiring fault or something wrong with the main/dip stalk.
If they are not H4 (ie the type that has main and dip in the same lamp ( i dont like the word 'bulb' as that is what you plant in the garden) then I would suspect wiring.
It is most likely a fuse i'd assume as when you switch to main beam on an H4 setup, it cuts out the dip intentionally and uses the other filiment.
Thats a good point on H4's actually - I was thinking it was a pair of H1s
On H4 the dip filament is turned off when main-beam is selected so if that relay or fuse is at fault then you get neither filament generating any light. Should be easy to find and fix in this case.
If they are not H4 (ie the type that has main and dip in the same lamp ( i dont like the word 'bulb' as that is what you plant in the garden) then I would suspect wiring.
It is most likely a fuse i'd assume as when you switch to main beam on an H4 setup, it cuts out the dip intentionally and uses the other filiment.
i don't like using the word bulb either
as i'm electrician
but using the word lamp some people think
thats what sits on a bedside table
1. SHORT SHIFT KIT
2. PORSCHE CAYENNE CALIPERS
3. H & R SPRINGS
4. BILSTEIN SHOXS
5. NEW BUSHES AND HP2 STRUTS
6. UPRATED HIGH OUTPUT COIL PACK
7. ,3" turbo back s/s/ exhaust
8. fmic fitted
right chaps, i got round to checking things with the lights this afternoon, and i checked the bulbs in my other car and they're fine,
i then checked the fuses and they're fine too, and accorsing to the fuse box diagram, there is no relay for the main beam, so is there a relay for them somewhere else?
and if not, i will presume the fault lyes in either the stalk or the wiring??
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment