S6 dash clocks

[goodall]

After being laid up for a while the speedo, tachometer, water temp and fuelmeter and digital read out have give up, the clock, oil and voltmeter seem to still work, i tried the fuse wasnt blown and the back light for the digital readout turned off once i removed it

is it likely just be a bad connection at back the dash or is possible that a wiring fault somewhere else possibly. what connections should be looking for to be lose at back clocks anyone know from experience

[goodall]

So this problem disappeared last time, however Its come back today and I'm still as confused as before

[goodall]

Progress on this has been that its the actual dash clocks, as I have fitted a set of 100 clocks as fault finding and they work, does anyone know of a circuit diagram for the S6 clocks or if there is a fuse or trip on the board?

On a side note, as a fault find measure I installed the engine ecu for the AAN engin I bought for my ur, its chipped and woe what a difference

[VagOrBust]

Progress on this has been that its the actual dash clocks, as I have fitted a set of 100 clocks as fault finding and they work, does anyone know of a circuit diagram for the S6 clocks or if there is a fuse or trip on the board?

On a side note, as a fault find measure I installed the engine ecu for the AAN engin I bought for my ur, its chipped and woe what a difference

Hello,
I've sent you a pm regarding the diagram's, however, I'd be really supprised if all the clocks failed at once. I'm guessing a faulty contact or a soldering that's gone bad.
Enjoy the extra horses!

[goodall]

PM replied, I'm hoping its a contact or voltage regulator at worst

Extra horses where fun, but took it out for now as it was a manual ecu and not sure how the auto would take it long term