HID help

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Jas11n
    replied
    My S2 has been running a 35watt setup from http://www.hids4u.co.uk/ for 12months now. A6 has had them in since March-ish.

    Bought one too many cheap sets from China.
    They may be cheap, but don't tend to last long and it's a PITA to change them (tis when you do my work hours)

    Highly recommend above supplier. UK based and can be got on the end of the phone. Very quick delivery.

    Last thing;
    Although I don't need them, it's nice to see detailed installation instructions................not the stupid make-no-sense Chinglish versions.

    Leave a comment:


  • Ross
    replied
    i'm in the same boat, want a decent set of slimline ballasts and would like a recommendation! if i end up going for some cheap ebay ones i'll probably go for fogs too - spare ballasts on board then!

    Leave a comment:


  • bertman
    replied
    well cheers for the replys,we are just waiting for someone to pop up to say that they bought a reasonably priced kit that is great quality and has had no apparent problems...................we will wait and see

    Leave a comment:


  • QuattroFever
    replied
    i've been through two ballasts since ownership. first set came on the car. second set went in a year ago and one side has started getting weaker\dimmer.

    quite interested in buying a quailty set too. Got my previous off ebay.

    Leave a comment:


  • lagz33
    replied
    Any links on some known reliable kits?

    Leave a comment:


  • Error404
    replied
    Word of warning, IIRC I gave Pete Acidburn the link to the ones he bought and have a load of problems with them now

    They keep dropping out for no reason, properly earthed etc. I'm going to buy another better quality kit as these are dangerous. You get what you pay for.

    Leave a comment:


  • Le S2 Audi
    replied
    Originally posted by skid
    Also, you might want to try and get a set where the ballasts dont need earthing. Makes for a cleaner and easier install.
    Think this may just depend on the state of your existing wiring... Mine didn't need any extra earths...

    Leave a comment:


  • skid
    replied
    Also, you might want to try and get a set where the ballasts dont need earthing. Makes for a cleaner and easier install.

    Leave a comment:


  • s2driveruk
    replied
    can't find where i sourced mine from Rob but i know it was from a UK ebayer and 55w H1. I think the newer 35w slimline/digital ballasts are supposed to be more efficient but dont make any difference to the light output etc. I think mine were either 5000 or 6000luminen so not a chave blue more a true white light. Must bag a set for the fogs next then get some full beams in a decent colour to match. At the moment the HID's on the dips are so bright it makes very little difference if i flick full beam on

    Someone (andyp?!?!?) had made a note of how to clean the actual projector lense and really helped to throw a better light out but i forget where i read it.

    Leave a comment:


  • Le S2 Audi
    replied
    Originally posted by bertman
    Pm'd pete last night and he gave me the info about the ones he bought.just being very blond atm and can't decide where to get them from
    This company has good feedback and have been mentioned on here many times... http://cgi.ebay.co.uk/SLIM-HID-CONVE...item33611eb2e1

    I would contact them BEFORE ordering to make sure you get the right ones... H1 6000K not sure on 35 or 50watt thoo...

    HTH

    Leave a comment:


  • bertman
    replied
    Pm'd pete last night and he gave me the info about the ones he bought.just being very blond atm and can't decide where to get them from

    Leave a comment:


  • Le S2 Audi
    replied
    Originally posted by bertman
    Where did you get these from and are they any good?.There is just so many darn kits out there,it's difficult to know where to start
    Pot Luck on Ebay.... Bought in the UK - Just in case there were any issues...

    Pete (Acidburn) has fitted some Chinese ones and seems to be happy with them I also have bought a set of H3's for the Fogs... But haven't fitted them yet..

    I would look for slimline Ballasts to make fitting the easier...

    Leave a comment:


  • Big Lee M
    replied
    Sorry it might be H1's it was a long time ago I fitted them.

    Leave a comment:


  • BRY
    replied
    I've got a set of these in the A3.
    No problems with them, they have been in for over a year.

    Leave a comment:


  • bertman
    replied
    Where did you get these from and are they any good?.There is just so many darn kits out there,it's difficult to know where to start

    Leave a comment:

Working...