Locks and ignition replacement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Compi
    S2Forum Hobbyist
    • Mar 2010
    • 24
    • Country: England

    #1

    Locks and ignition replacement

    Hi!
    I'm about to change the my car's locks (someone tryed to brake in from passengers side and destroyed the lock) and I found a full set of locks (trunk's too) and ignition switch from a coupe.. Does anyone knows if they would fit to my saloon ?
  • Compi
    S2Forum Hobbyist
    • Mar 2010
    • 24
    • Country: England

    #2
    anyone?

    Comment

    • Nuvo
      S2Forum Possessed
      • Nov 2003
      • 3826

      #3
      The door locks should fit, the trunk/boot lock won't.

      Comment

      • Tonks4x4
        Retired OG Mod
        • Nov 2005
        • 3062
        • Country: United Kingdom

        #4
        The door barrels are the same. Not too sure about the bootlid one though.

        Have they damaged the ignition barrel?

        You could swap the tumblers in another door lock to match your old key.
        Audi Nut!!!

        Comment

        • Compi
          S2Forum Hobbyist
          • Mar 2010
          • 24
          • Country: England

          #5
          No the ignition barrel is ok, I didn't know I could swap tumblers.. that's a good idea
          thanks!

          Comment

          • macspring
            S2Forum Zealot
            • Mar 2005
            • 6371
            • Home: Ireland Current: Wallis & Futuna

            #6
            If it was me,

            TBH, change the tumblers and make up a "new" barrel for your passenger door is more rewarding and not more hassle than changing all of the remaining barrels in your car.

            Get a loan of a digital micrometer to measure the size/difference in the tumblers and it makes it very straightforward.

            Practice on a barrel or two from the breakers, which will also surrender a few spare tumblers to assist in making up the sequence of tumblers for your car's set of original locks?



            Kind regards.

            Comment

            • Tonks4x4
              Retired OG Mod
              • Nov 2005
              • 3062
              • Country: United Kingdom

              #7
              If you are short on some tumbler sizes let me know, I save every single lock from every Audi I ever broke just for this purpose.

              I had to rebuild my ignition barrel before Xmas in my s2 as the little aluminium casting inside had crumbled.
              Audi Nut!!!

              Comment

              • Compi
                S2Forum Hobbyist
                • Mar 2010
                • 24
                • Country: England

                #8
                Many thanks for the ideas and offers..
                I think I have kept the barrels from my crashed b3 so if I hope I find some time this weekend to dedicate in it..
                If everything goes right I'll post pics..

                Comment

                • wildoliver
                  S2Forum Fanatic
                  • Apr 2009
                  • 70
                  • Country: United Kingdom

                  #9
                  Incidentally from memory saloon and coupe bootlocks are the same, it's avant that are different.

                  Door locks are the same although there are 2 different types of handle/lock unit (early and late) but they can be taken apart and used in either case. Ignition is always the same.

                  Don't forget to do the glovebox lock too.

                  Comment

                  • Nuvo
                    S2Forum Possessed
                    • Nov 2003
                    • 3826

                    #10
                    Sorry, I don't agree with you there. The saloon and avant boot locks are the same. The coupe lock is different,

                    Comment

                    Working...