9.5mm piggyback terminal

[Error404]

Can't for the life of me find one of these anywhere!
anyone know where I can get one of these for 9.5mm spade conector?

[driftin jo]

http://www.ebay.co.uk/itm/25-crimp-t...-/300551771712

[Error404]

Thanks mate, but they are for 6.3mm spades which are pretty common! Can't find them for 9.5mm spades! (Trying to split a 30a feed from the fuse board without having to resort to cutting and splicing existing looms!)

[driftin jo]

sorry , thats a 6.3

[Kieron20V]

Tried CBS or auto electrical supplies? Got most of bits there.

[Sleeper_Avant]

www.polevolt.co.uk got owt?

[Sleeper_Avant]

any good?

http://polevolt.co.uk/cgi-bin/ss000001.pl?page=search&PR=-1&TB=A&SS=9.5+terminal&ACTION=quick+search

[Error404]

yeah i tried all the usual suspects with no joy

[newsh]

If you can get males and females then make a short "Y" splitter

[Error404]

Yeah that was my falback option, just a bit scruffy.... not that you'd see it under the fuse board

[martinws]

Thanks mate, but they are for 6.3mm spades which are pretty common! Can't find them for 9.5mm spades! (Trying to split a 30a feed from the fuse board without having to resort to cutting and splicing existing looms!)

Are you doing this to split the load that feeds the fuse box? If so a typ85 fuse box feed has 2 cables coming from the one 9.5mm spade along to 2 separate eyelets.

[terrybullwon]

Farnell?

[Error404]

Are you doing this to split the load that feeds the fuse box? If so a typ85 fuse box feed has 2 cables coming from the one 9.5mm spade along to 2 separate eyelets.

hey Martin, no I've run out of 30a accessory outputs on my fuse board. There was a factory break-out connector but they are NLA now and rocking horse poo as they only seem to have been used on cars with all the options.

I'll try them James, otherwise I'll do as John suggested and make up a little pig tail