This is wrecking my head the last few weeks, If anyone has any ideas please help.
Be patient with me:
93 Audi 80 TDI
Here are the wires as follows and the voltage with ignition on and car not running
Sunroof Switch:
Blue 1.6v
Brown 0v (Earth)
Red/Yellow 1.6v
Black/Red 1.6v
Black/Brown 1.6v
Sunroof Motor:
Red/Blue 1.6v
Blue 1.6v
White 1.6v
Brown 1.6v (?? Should this be 0v (Earth) ??)
Black 1.6v
At opposite end of motor then (going to relay)
Green 1.6v
Black 1.6v
Relay:
Red/Yellow 0v
Brown 0v
White,Green, and Red/Black 0v
Black 0v
Now when I put 12v direct to the Red/Blue or the Blue on the Motor itself (see pic), I have 12v at all the points that I previously had 1.6v.
And the sunroof works 100 percent.
And with the 12v direct to the Red/Blue or Blue, I now have 12v at 3 points of the relay instead of 0v as previous. (none at the Brown still as Earth).
When I press sunroof switch all volts go to 0v.
SO anyone know why I only have 1.6v ? Whats to blame
Be patient with me:
93 Audi 80 TDI
Here are the wires as follows and the voltage with ignition on and car not running
Sunroof Switch:
Blue 1.6v
Brown 0v (Earth)
Red/Yellow 1.6v
Black/Red 1.6v
Black/Brown 1.6v
Sunroof Motor:
Red/Blue 1.6v
Blue 1.6v
White 1.6v
Brown 1.6v (?? Should this be 0v (Earth) ??)
Black 1.6v
At opposite end of motor then (going to relay)
Green 1.6v
Black 1.6v
Relay:
Red/Yellow 0v
Brown 0v
White,Green, and Red/Black 0v
Black 0v
Now when I put 12v direct to the Red/Blue or the Blue on the Motor itself (see pic), I have 12v at all the points that I previously had 1.6v.
And the sunroof works 100 percent.
And with the 12v direct to the Red/Blue or Blue, I now have 12v at 3 points of the relay instead of 0v as previous. (none at the Brown still as Earth).
When I press sunroof switch all volts go to 0v.
SO anyone know why I only have 1.6v ? Whats to blame
)
Comment