This is the Avant, had a problem with the front right indicator and repeater not working. Bulbs buzzed out of so started checking wiring, got voltage at the front one and found the bulb contact was intermittent. Cleaned that up and it now works but the side repeater is still dead, no voltage or ground showing.
Now I think I remember that the repeater wiring is plugged to the main loom but I can't see where the wiring goes to. With the headlight out I can just see the wire clipped in the top of the wing but then it drops down out of sight, removing indicator and fog doesn't help. There is a white clip behind the headlight which takes on of those round 2 pin connectors, this is empty.
Any ideas before I have to take the bumper off?
Now I think I remember that the repeater wiring is plugged to the main loom but I can't see where the wiring goes to. With the headlight out I can just see the wire clipped in the top of the wing but then it drops down out of sight, removing indicator and fog doesn't help. There is a white clip behind the headlight which takes on of those round 2 pin connectors, this is empty.
Any ideas before I have to take the bumper off?
Comment