No Directional indicators!!!!

[studley07]

Hi Yeah can anyone one help out with this one. Come to use my QC20v and have no indicators working. Hazards work and all flash with the alarm turned on and off and hazards work off stalk control but no indicators? They have never caused me any problems before, is this an easy fix or a trip to the local Audi garage. Prity handy at carrying out repairs but would rather it be done properly than me go at it and cause more work because i might do something unwillingly wrong. Some help would be mucho appreciated.

[Chaos0211]

No experience of this problem myself but first thing I would try to rule out would be the stalk 1st basic thing I'd test would be are the parking lights working. If you've recently done any work to the car around the electrics I'd give that a check over too including fuses hope this helps a bit good luck

[bluequattro]

Might as well weigh it in then. Bring it to me, I'm not that far from you. Lol
As above. Check stalks-especially wiring, I had a car that melted the plug as previous owner had been messing with wires.
I ve a cabriolet shell with correct plugs if you need them, just come fetch them

[DEREKCO]

No flashers

Have you tried the fuse ,flashers run on a separate fuse ,I fell foul of that

[newsh]

Yes, separate fuses for indicators and hazards..

[ManiacuV6]

First check fuse . After that check flasher relay. Ou will find some cold joints inside Same on the windows relay.

[DEREKCO]

Flashers

Try the separate fuse I bought a relay and my flasher still did not work I did not know that flashers and hazards are on different fuses .sure enough the fuse had blown now have a spare flasher relay