Wiring pics of sunroof

[Rikki Kitto]

Hi peeps anyone got close up pics of wiring from loom to sun roof control just replaced my sunroof cartridge took pics but lost em, the loom wires are different colours to the sunroof side

[Rikki Kitto]

It's dark outside now and the wifey has told me to get in doors so tomorrow will be fine chaps thanks

[AquaS2]

You weren't wrong about being outside all day

[Rikki Kitto]

Nightmare day but at least the new sunroof is in just gota wire it up now, goona get the oil cooler welded up today bud then send pictures, peice of mind alround is the way forwrd

[Rikki Kitto]

Wiring help please gurus

[M2ki]

Switch with 3 wires

http://s2central.com/S2_Schematics/E/E05.pdf

Switch with 5 wires

http://s2central.com/S2_Schematics/E/E19.pdf

[Rikki Kitto]

Thanks for the info but it doesn't help as I am a bit thick, need pics of which colour wires go from loom to switch if poss peeps

[M2ki]

I don't actually understand what you did. Switch and motor have plugs. Or did you took the wires out from the plug? Did the new cassete came with motor? If so why not use your old motor.

Brown wire with white plug is ground and yellow wire with black plug is +12V from windows/electric sunroof control unit.

[Rikki Kitto]

I need help with the colours of the wires from the loom that runs up the windscreen pillar to the switch they have been cut in the past and soldered so now I have different colour wires on the switch and loom

[M2ki]

There are only four wires. Thick one with single wire green plug is positive from electric windows loom, other thick one with hole in the end is negative.

Interior light:
Pin 1: Positive (white/black stripe) from central locking, when you open the door, delay etc. Goes to green plug pin 2
Pin 2: Positive (black), thin red/black stripe is for illuminated mirrors. Goes to green plug pin 3
Pin 3: Ground (brown) from roof motor white plug.

Green plug:
Pin 1: empty
Pin 2: Positive (white/black stripe) from central locking, when you open the door, delay etc.
Pin 3: Positive (black), thin red/black stripe is for illuminated mirrors.

Roof motor:
Black plug: positive from single pin green plug.
White plug: ground from single wire with hole in the end.

[Rikki Kitto]

Cheers need to know how the wires in the middle two pics join together please

[M2ki]

Nice
Blue and violet go to the other side of the relay.
Two yellow and two green one come direclty from the motor?

[Rikki Kitto]

OK the two yellow and two green are the wires that run down the pillar do these connect to the two yellow/red and black ones in pic2

[M2ki]

Ok, now I can understand.

There is no way to tell from just looking those pics. You have to check the other end or use multimeter.
Two yellow/reds and two blacks should be connected to each other. I have no idea why someone would cut them.


Do you still have the black 3 pin plug for interior light? And the 4 pin black plug from the switch?

[Rikki Kitto]

Sure they are in there somewhere