Hallo i just got my self a audi s2 1992. I think there is a vacum hose missing at the top of the wastegate i cant find it and i dont no where its going.And the boost gauge only show o,4 bar at fuld speed i dont no what the problem is. help me
missing hose
Collapse
X
-
Welcome!
Don't worry there's not meant to be anything connected to the top of the wastegate.
The boost is meant to reduce at high RPM, but there are other ECU/Turbo experts here who could say more. Is your car chipped do you know? Are you noticing any hesitation or jerking issues with car on full throttle?Ex S2 owner, now running around in an A4 Avant quattro...
Comment
-
Martin 0.4bar sounds about right for a standard S2 if you have you WGFV disconnected at the moment. Check the WGFV is connected and working and you should get 1-1.1bar on over boost then.Greg
S2Forum.com Administrator & Webmaster
'93 Coupe with a few tweeks
Comment
-
Hi Martin, welcome to the forum
Where abouts are you from? As it will help people answer in a way that should be as understandable as possible for yourself to read
WFGV = Waste Gate Frequency Valve, there is a valve that controls the boost pressure, if it is not plugged in then you will only get the amount of boost allowed by the spring in the waste gate.
Check for a plug that isnt connected in that area.Ant
2007 Mk5 Golf GTi, 3 door, DSG, REVO Stg 2 and other goodies
2011 Kawasaki Z1000

Comment
-
Martin , wgfv is wastegate frequency vavle. It's regulates boost on wich wastegate opends.
Look like this
And located near your turbo after the headlight.Vadim.
New engine (mechanical PKM head) , Alcon 332mm brakes , Pauter rods , Mahle pistons, GT30R , kw v2 sucpension , new exhaust. 608HP. For SALE !Comment
-
hi,
o,4 bar is typical for damaged N75 (magnetic valve which is conected to dampvalve
and electric conected) sorry for bad english.cost about 40 Euros.
Good Luck!Comment
This is the first question everyone asks when they buy an S2. This is just to test the diaphram.
Comment