Hi what sort of boost should i get with my mrc remapped s2? in first and second i get about 15 psi is this correct? When i first got the boost gauge fitted it used to shoot straight passed 20 psi in third and fourth and so on. thanks for your help
what boost?
Collapse
X
-
i get around about 19 psi now but it used to race straight passed 20 in the higher gears. this could just be the gauge. i think it should run about 21 psi so theres not much difference.3'' Longlife Exhaust, Koni Adjustables, H&R Springs, Full RS2 Setup with Mr Nugents RS2 Chips
(just need the RS2 Airbox)Comment
-
i thought i would do a test tonight to see what sort of boost pressure i am getting in each gear. In first (all at WOT) i get about 15 psi, In second i get 15 psi, third i get 15 psi, 4th 19psi, 5th 19 psi, 6th 19 psi. This is booting it through the entire rev range to just before the red line. if i boot it in third from about 20mph i get about 19psi which is strange. I just need to know if this is normal? i thought i should be seeing 1.5bar in every gear is this correct? Thanks for your help3'' Longlife Exhaust, Koni Adjustables, H&R Springs, Full RS2 Setup with Mr Nugents RS2 Chips
(just need the RS2 Airbox)Comment
-
Steve, I have mapped your car to run 1.35 Bar, which is 19.85 psig, so it sounds right to me. You always get lower boost in the lower gears because there is no time for the engine to produce the gasses that will spool the turbo up to higher boost levels...
HTH,
Mihnea'98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs
www.MRCTuning.com
info@MRCTuning.com
Workshop DirectionsComment
Comment