2nd hand rods anyone?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SteveH
    Super Moderator
    • Jul 2003
    • 4460
    • Country: United Kingdom

    #16
    And another with the piston removed.
    Attached Files
    91 Modded 3B
    14 A6 Avant Black Edition

    Comment

    • audiman
      S2Forum Freak
      • Jul 2003
      • 4827
      • Country: United Kingdom

      #17
      You da man Steve
      Have it!
      Have you got any part numbers for the carillos? Will see if I can get hold of a set cheaply
      sigpic
      Tom C - www.rcmr.co.uk
      Audi UR Quattro
      Audi 100 C3 2.0 5 cyl 115ps
      Audi S2 - 07k engine project aiming for 800ps
      Audi B5 RS4 645ps 911nm

      Comment

      • Vagsport
        S2Forum Maniac
        • Aug 2003
        • 533
        • Country: United States

        #18
        Out of interest, Steve. How fast were you going when you created those "S" rods? Did the engine cut out straight away, or what? Just curious, when I bought my type 89 Coupe q, it had a lovely peephole in the block @ # 2 zyl, the previous owner swore the KV engine kept going till it ran out of oil and seized up! :confused:

        Siena

        Comment

        • Sweeper
          S2Forum Extremist
          • Jul 2003
          • 1317
          • Country: Latvia

          #19
          audiman: there are no part number for carrilos for s2. They custom manufacture them in 6 weeks.
          Vadim.

          New engine (mechanical PKM head) , Alcon 332mm brakes , Pauter rods , Mahle pistons, GT30R , kw v2 sucpension , new exhaust. 608HP. For SALE !

          Comment

          • audiman
            S2Forum Freak
            • Jul 2003
            • 4827
            • Country: United Kingdom

            #20
            Doh! i found there website in the USA



            You have to email them for application and prices. Havent done so yet, but these rods are on my christmas list. I bet santa flicks me the bird!
            sigpic
            Tom C - www.rcmr.co.uk
            Audi UR Quattro
            Audi 100 C3 2.0 5 cyl 115ps
            Audi S2 - 07k engine project aiming for 800ps
            Audi B5 RS4 645ps 911nm

            Comment

            • Sweeper
              S2Forum Extremist
              • Jul 2003
              • 1317
              • Country: Latvia

              #21
              audiman: Yep they will contact you regarding rods saying: Something like 270$/each , 6 weeks manufacture time and they don't have a part number.

              =]
              Vadim.

              New engine (mechanical PKM head) , Alcon 332mm brakes , Pauter rods , Mahle pistons, GT30R , kw v2 sucpension , new exhaust. 608HP. For SALE !

              Comment

              • 90quattrocoupe
                S2Forum Maniac
                • Nov 2003
                • 771
                • Country: United States

                #22
                What about a group buy?
                They can have my car when they pry my cold dead fingers from the steering wheel.

                Comment

                • 90quattrocoupe
                  S2Forum Maniac
                  • Nov 2003
                  • 771
                  • Country: United States

                  #23
                  I just sent Carillo email and asked about group buy. Will let you know.

                  Besides, I live in the neighborhood.
                  They can have my car when they pry my cold dead fingers from the steering wheel.

                  Comment

                  • SteveH
                    Super Moderator
                    • Jul 2003
                    • 4460
                    • Country: United Kingdom

                    #24
                    Siena.. The car still ran with the rods bent like they are! There was a nasty knocking like a big end had let go. Other than that, it was still a runner.
                    The damage was done on a hard drag through the gears, so I'm not sure exactly when it happened...somewhere between 2nd and 4th gear
                    91 Modded 3B
                    14 A6 Avant Black Edition

                    Comment

                    • 90quattrocoupe
                      S2Forum Maniac
                      • Nov 2003
                      • 771
                      • Country: United States

                      #25
                      Carillo got back to me in email. Sweeper was right. Rods are 262 each, they are out of stock, but will have some in about 6 weeks.

                      Tha bad news. NO GROUP BUY. Bummer.

                      Greg

                      Originally posted by 90quattrocoupe
                      I just sent Carillo email and asked about group buy. Will let you know.

                      Besides, I live in the neighborhood.
                      They can have my car when they pry my cold dead fingers from the steering wheel.

                      Comment

                      • SteveH
                        Super Moderator
                        • Jul 2003
                        • 4460
                        • Country: United Kingdom

                        #26
                        Checkout my info on Pauter and Carrillo prices in the 'group buy' section if you're interested in upgrading. I'll need to check, but I think the Pauter rods were £700 GBP, not £750
                        91 Modded 3B
                        14 A6 Avant Black Edition

                        Comment

                        • 90quattrocoupe
                          S2Forum Maniac
                          • Nov 2003
                          • 771
                          • Country: United States

                          #27
                          At the current exchange rate 700GBP is 1233 USD for the Pauter.

                          Carillos are 1048USD plus shipping without a group buy.

                          Greg

                          Originally posted by SteveH
                          Checkout my info on Pauter and Carrillo prices in the 'group buy' section if you're interested in upgrading. I'll need to check, but I think the Pauter rods were £700 GBP, not £750
                          They can have my car when they pry my cold dead fingers from the steering wheel.

                          Comment

                          • Mihnea
                            S2Forum Extremist
                            • Jul 2003
                            • 1288
                            • Home: Belgium Current: United Kingdom

                            #28
                            Originally posted by 90quattrocoupe
                            At the current exchange rate 700GBP is 1233 USD for the Pauter.

                            Carillos are 1048USD plus shipping without a group buy.

                            Greg
                            That's 850 Euro+ shipping, can I have 2 sets pls?

                            Just kidding, need to find me a proper beater first, then I'll be on the market for some rods too...


                            Cheers,


                            Mihnea
                            '98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs

                            www.MRCTuning.com
                            info@MRCTuning.com
                            Workshop Directions

                            Comment

                            • Pembo
                              S2Forum Addict
                              • Aug 2004
                              • 295
                              • Country: United Kingdom

                              #29
                              Try this for size!


                              Why don't my photos ever work on this forum?
                              sigpic
                              Pembo
                              quattro - Original 4WD rallying
                              Rally Car photos

                              Comment

                              • Val
                                S2Forum Maniac
                                • Apr 2008
                                • 630
                                • Country: Latvia

                                #30
                                Originally posted by SteveH
                                Freshly cleaned and ready to go to a new home...offers anyone?
                                How much you want for the bent ones?
                                5vtq gte

                                Comment

                                Working...