And another with the piston removed.
2nd hand rods anyone?
Collapse
X
-
You da man Steve
Have it!
Have you got any part numbers for the carillos? Will see if I can get hold of a set cheaply
sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
Out of interest, Steve. How fast were you going when you created those "S" rods? Did the engine cut out straight away, or what? Just curious, when I bought my type 89 Coupe q, it had a lovely peephole in the block @ # 2 zyl, the previous owner swore the KV engine kept going till it ran out of oil and seized up! :confused:
SienaComment
-
audiman: there are no part number for carrilos for s2. They custom manufacture them in 6 weeks.Vadim.
New engine (mechanical PKM head) , Alcon 332mm brakes , Pauter rods , Mahle pistons, GT30R , kw v2 sucpension , new exhaust. 608HP. For SALE !Comment
-
Doh! i found there website in the USA
You have to email them for application and prices. Havent done so yet, but these rods are on my christmas list. I bet santa flicks me the bird!sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
audiman: Yep they will contact you regarding rods saying: Something like 270$/each , 6 weeks manufacture time and they don't have a part number.
=]Vadim.
New engine (mechanical PKM head) , Alcon 332mm brakes , Pauter rods , Mahle pistons, GT30R , kw v2 sucpension , new exhaust. 608HP. For SALE !Comment
-
What about a group buy?They can have my car when they pry my cold dead fingers from the steering wheel.Comment
-
I just sent Carillo email and asked about group buy. Will let you know.
Besides, I live in the neighborhood.They can have my car when they pry my cold dead fingers from the steering wheel.Comment
-
Siena.. The car still ran with the rods bent like they are! There was a nasty knocking like a big end had let go. Other than that, it was still a runner.
The damage was done on a hard drag through the gears, so I'm not sure exactly when it happened...somewhere between 2nd and 4th gear
91 Modded 3B
14 A6 Avant Black EditionComment
-
Carillo got back to me in email. Sweeper was right. Rods are 262 each, they are out of stock, but will have some in about 6 weeks.
Tha bad news. NO GROUP BUY. Bummer.
Greg
Originally posted by 90quattrocoupe
I just sent Carillo email and asked about group buy. Will let you know.
Besides, I live in the neighborhood.They can have my car when they pry my cold dead fingers from the steering wheel.Comment
-
At the current exchange rate 700GBP is 1233 USD for the Pauter.
Carillos are 1048USD plus shipping without a group buy.
Greg
Originally posted by SteveH
Checkout my info on Pauter and Carrillo prices in the 'group buy' section if you're interested in upgrading. I'll need to check, but I think the Pauter rods were £700 GBP, not £750
They can have my car when they pry my cold dead fingers from the steering wheel.Comment
-
That's 850 Euro+ shipping, can I have 2 sets pls?Originally posted by 90quattrocoupe
At the current exchange rate 700GBP is 1233 USD for the Pauter.
Carillos are 1048USD plus shipping without a group buy.
Greg
Just kidding, need to find me a proper beater first, then I'll be on the market for some rods too...
Cheers,
Mihnea'98 Silver Grey 2.7T S4, dual 2.75" turbo back exhaust with no cats, FMIC, BIG injectors, 10 Bar motorsport fuel pump, modded RS4 turbos, tubular exhaust manifolds, custom intakes, RS4 MAF, Bilstein PSS9, H&R ARBs, 19" BBS CH, custom remap, 511 BHP/505ft-lbs
www.MRCTuning.com
info@MRCTuning.com
Workshop DirectionsComment
-
Try this for size!
Why don't my photos ever work on this forum?Comment


Comment