Racing Billet Crank

[baltiboyS2]

Head

Just send me a pm when you need the head i am in the process of putting the car back together but can wait for a month or little bit longer before i need the head back just send me the address the head needs to got to and i will get something sorted out with yourself nearer the time

Raj ABY

[aelred]

Raj PM sent.
Thanks

[Jamo]

I love this forum, so many people willing to help each other

[Jon441cc]

http://www.centroidcnc.com/cncvideo/video5axiscylhead.htm

[baltiboyS2]

scared

Im scared !!

The head is boxed ready to go just have to wait till alred comes back from holiday

Raj Aby

[Jamo]

Did this ever get anywhere?

[baltiboyS2]

Not sure Jamo i sent the head down and receoved it back a couple of weeks later dont know what the outcome was myself??

Raj Aby

[aelred]

As no interest was shown this is on hold, but I have some interest shown by people across the water and further so things might move again. The trouble is the british people are very fond of their money.

[Jamo]

As no interest was shown this is on hold, but I have some interest shown by people across the water and further so things might move again. The trouble is the british people are very fond of their money.

True, because the goverment are very fond of taxing us

[Jensk]

I might be interested in the CNC porting to. But that is of course if the cost of sending it to the UK and having it machined there is less then here in Norway

[aelred]

Well after all this time i have to knock this on the head. The cost of CNCing the head is quite expensive, due to the fact that digitizing the details and measurament is expensive, once that is done I need at least 10 heads to be CNCed to make it somewhat cost effective and I do not think this is going to happen as the cost of digitizing shared between 10 people plus the CNCing will make the cost somewhere about £1100 to £1200 plus VAT per head and i think iI am not going to have any takers at this price.

Having said that I have something else lined up in respect of porting heads, I will let you know shortly.

[Jay]

I'm interested... suprisingly:mischeif:

Jay

[aelred]

Jay,

I have something on the pipeline I will know next week hopefully

[BRY]

I start a new job next week where I will have, amongst other things, two five axis CNC machines for me to play with.
Stroker blocks and cylinder heads may find their way onto these at the weekends

[HPmuirt]

I start a new job next week where I will have, amongst other things, two five axis CNC machines for me to play with.
Stroker blocks and cylinder heads may find their way onto these at the weekends

You know BRY, I for one have always said that you are a VERY nice man

cheers n

Si