Has anyone ever concidered this??

[murat]

-need to remove the bumper
-do the plumbing
-hook up the cable and switch

if you want to use the easiest system possible, i would go for a wot switch existing widscreen washer system, and drilled copper tubing in front of intercooler, this will definitely be the easiest system.

complex systems are very good but its not a diy job, if you have some extra cash you can go with the aquamist system.

[corrado]

Aquamist isnt the only system out there, other good systems and cheaper are boost cooler, alky control ect. You can mount the water deposit in the boot, i would run a big 15 litre one so you fill it up evertime you fill the car up. I would run 70 water 30 alcohol. Some systems are boost controlled, only activated after the selected boost scale. You would only activat the system after say 15 psi and will stay on untill boost drops below that. So it shouldnt use too much liquid. More boost and more timing can be used to exctract more power.

Me personally only use the system when I am runnig + 15psi out of the GT35r, I dont drive my car daily but my deposit is 15l and I have only filled it up 2 times so far in 2 months. I tune the car myself so its easy to tune it/advance ingnition and monitor afr with changes but can be a problem for stock ecu cars so its a bit tricky.

[A80Avant]

getting this thread started again...

im really concidering fitting the aquamist 1s system on the RS2 pretty soon...

However here in Greece there is little experience in mounting and installing this so it seems i would have to do some things on my own.
I read on the website that the pump is better fitted not more than 1 meter away from the battery,something that is impossible for the RS2,hence i will need longer cables.Does that mean that the current will drop,even if i use the cables that are said to be used for that?i dont want to buy that system and have it NOT work properly..!!

any advice and how to is mostly appreciated!!

[Corey]

How hard is it to install the system ? also which system would the one to go for

Not very difficult, I have one of the aquamist systems available that I have removed from my project car if your interested?

[pastures16]

whats the damage (price) on that system