sorry to hijack the thread but what should a standard aby be boosting im getting about 13psi
annoying boost problems!
Collapse
X
-
-
I stand corrected on that, according to S2 Central both the 3B and the ABY make 0.83bar ( 12psi ) boost, but the ABY has overboost to 1.15bar ( 16.6psi )
sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racerComment
-
cheers for that andy looked on s2central but must be blind
the aby has over boost for what reason protection???94 s2 avant
aoc member 1116
Comment
-
Quote from S2 Central:-
"The ECU of the ABY engine has one other fundamental difference compared to the 3B in that it has a special 'overboost' mode which allows boost pressure up to a maximum of 1.15bar in short bursts to allow increased torque to be generated when needed e.g overtaking. Outside of the 'overboost' mode the ABY generates the same 0.83bar of boost as the 3B in normal circumstances. The overboost mode is limited by the factory ECU to bursts of no more than fifteen seconds."
Not 100% certain what triggers this but I thinks it's when you put your foot flat to the floor quickly in 3rd/4th/5th & 6th gears, as if you are going for an overtake.sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racerComment
-
Comment