I was checking my MFTS on the weekend and spotted a fair amount of oil near the top of the clutch.
After having a look around i noticed that the Breather Tube 034 103 221 AH that runs to the Pressure Regulating Valve 034 129 101 A was completely built up with crap and also had a 1" split in it that has been leaking oil all over the shot.
This has been ongoing for a while but i only just found the leak.
I know these PVC tubes are hideously expensive so now seems like a good time to install the new breather/catcher tank that was purchased a few months ago - Just need to get the right lengths of samco hose and do a little bit of research on here as to where to connect it etc.
I did find a few threads already on people that have done this already.
Does anyone have details on what is required apart form the tank itself?
Thanks in advance.
Bo
IMG_1245.JPG
After having a look around i noticed that the Breather Tube 034 103 221 AH that runs to the Pressure Regulating Valve 034 129 101 A was completely built up with crap and also had a 1" split in it that has been leaking oil all over the shot.
This has been ongoing for a while but i only just found the leak.
I know these PVC tubes are hideously expensive so now seems like a good time to install the new breather/catcher tank that was purchased a few months ago - Just need to get the right lengths of samco hose and do a little bit of research on here as to where to connect it etc.
I did find a few threads already on people that have done this already.
Does anyone have details on what is required apart form the tank itself?
Thanks in advance.
Bo
IMG_1245.JPG
Comment