Announcement

Collapse
No announcement yet.

Oil leak Precision turbo

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oil leak Precision turbo

    Hi! Noticed today that my turbo was smooking a little of the exhaust housing. Removed my turbo blanket and found a small trace of oil coming out between the exhaust housing and bearing housing. The turbo is a Precision 58/58 (not bb). Worked fine with my setup for 2 years so i don't think it has something to do with my oil-drain or oil feed. Any one that have experienced this with their turbo? Is there a gasket between the housings? because i don't find any info about this on the net.


    You do not have permission to view this gallery.
    This gallery has 1 photos.

  • #2
    Shaft seals are likely leaking a little. It's rebuild time if it gets worse or you can't live with it as it is.
    91 Modded 3B
    14 A6 Avant Black Edition

    Comment


    • #3
      But if it is the shaft seal, wouldn't it smoke from the exhaust then? Not leak there?

      Comment


      • #4
        Somebody other than me must had this issue? Or did I just have bad luck..

        Comment


        • #5
          Nobody had the same issue?

          Comment

          Working...
          X