Announcement

Collapse
No announcement yet.

Audi S2 3B engine cold start problem.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Audi S2 3B engine cold start problem.

    Hello,

    If engine is gold then rpm goes between 400-1000rpm. About a minute it will be steady.
    What would be normal rpm with cold engine? Mines always been 800rpm. Cold or warm.
    Also RPM-s will go crasy if i will stop before stop sine and then it will also do like it was gold engine. But after 20 minutes of ride, everything goes ok.
    I today started car and it looks like only 3-4 cylinders work. revs jumped 300-1000rpm. After 10 minutes of ride and car was perfect again.

  • #2
    Remove ISV
    Wash it out with paraffin or diesel
    Lube with a little light oil
    Re- install

    See if that helps.

    S2 Coupe 3B Project


    Ur quattro restoration

    S2 Avant

    Boost is the new rock and roll!
    sigpic

    Comment


    • #3
      Originally posted by newsh View Post
      Remove ISV
      Wash it out with paraffin or diesel
      Lube with a little light oil
      Re- install

      See if that helps.
      If it was ISV, then dosent it make trouble even if engine is hot?

      Comment


      • #4
        Not always

        S2 Coupe 3B Project


        Ur quattro restoration

        S2 Avant

        Boost is the new rock and roll!
        sigpic

        Comment

        Working...
        X