Gtx3582 gen2 low on power?

[s2dk]

Hello

so finaly Got my engine map done. With the new turbo its ar82 Btw

im running a turbular manifold and a furans pure race manifold. A Big front ic and 3” pipings
3.5” exhuast

it did just shy of 550 and 600 nm at 2.3 bar

litle about the engine
more Stock cr. Stock head and Stock Aby cams
only thing not Stock is rods

we tryid to push 2.4 bar But only made 10 more hp so we dield it Down to 2.2 Again
redline is 7400 now

my sence træls me that Im in need of better cams
but witch ?? Any ideal
fuel is 99 vpower as its the only thing we Got here in Denmark

Ty for your time

[mac2226]

Fcp engineering

[s2dk]

???

[mac2226]

They sell cams,just ask them for advice on cams What’s best

[s2dk]

Okay just did not see Any on their website

[kessu74]

wheels or motor hp??

[s2dk]

Engine or chp If you want

[kessu74]

it sounds quite low hp

[s2dk]

Yah Thats Why Im thinking cams

[diesel des]

What sort of timing where you running? Was ping the limiting factor? Did you measure egt? A good head and cams would help but I think you are 50hp short if that's crank bhp.

Sent from my Moto G (5) using Tapatalk

[diesel des]

Do fcp do cams? Anyone have experience?

Sent from my Moto G (5) using Tapatalk

[Thuppu]

Pretty sure they would arrange you everything you need.

[s2dk]

Diesel des. Far as i know No knock. I Could send you the map But i dont know the timing atm
egt were Allso safe

[s2dk]

Timing at boost past 5000 rpm is not past 10 dec
tuner Said that more timing did not give much

[A80Avant]

10deg of timing means that the whole thing is about what it can give you due to high compression and possible knock.
What fuel mixture is he aiming for? 0.80 or less?