Tps wiring issue

[220bhp]

I have just tried to check my tps using the instructions in the picture, only to find the wiring on my 3b is different as in the second pic . Can anyone confirm my wiring is correct or not

[sjw185]

plug in photo is correct with 3b schematic that i used to extend my 3b throttle wiring.

1 - Red/Black
2 - Black/Purple
3 - Green/Blue
4 - Brown/Yellow
5 - empty
6 - Green/Purple

[220bhp]

Thanks that’s brilliant

[UrS4boy]

I have just tried to check my tps using the instructions in the picture, only to find the wiring on my 3b is different as in the second pic . Can anyone confirm my wiring is correct or not

That test sheet is my handy work and it is based on the wiring for an UrS4/S6 AAN. It is linked from this post:

G69 / F60 Throttle valve position potentiometer /idle switch information: http://forums.quattroworld.com/s4s6/msgs/20405.phtml

I often tried to include wiring for the ABYs and ADUs in my posts (because they are so close to the AAN), but I almost never included 3B wiring. (Sorry )

I guess should have labeled this "AAN" to prevent confusion. I will try to correct that today and add an annotated version of your 3B TPS photo.

[Rikki Kitto]

By the look of the wiring it might be worth pulling it apart and re connecting it all while you're at it

[220bhp]

Yes Riki I have a new connector to go on

[newsh]

My 3B TPS plug, posted In the other thread too.